In the telecommunication market, Linksys has upheld the topmost position. Laced with advanced networking functionalities, its routers and range extenders offer seamless connectivity and high-speed Internet. However, if you want to enjoy an amplified network range within your premises, then you must know how to install linksys extender.
Therefore, in this guide, we provide you the detailed information regarding the complete process to install the Linksys range booster. Additionally, this blog presents the highlights of the effective methods to carry out this process. So, if you are also looking for a complete guide on how to install linksys range extender, walk through this guide!
How to Install Linksys extender efficiently?
Generally, there are two ways to install the Linksys range extenders, i.e., as a wireless range extender or as an access point. Before you head to install your networking device, it is important to have a stable internet connection, power supply, accurate admin credentials, computer, etc.
Additionally, you can use two methods to accomplish this process, which include the WPS button method and the web GUI method. Thus, the detailed process of installing the Linksys extenders using both ways is defined below:
Linksys wireless extender installation through WPS button
- First, plug in your networking device to the power outlet.
- Now, place your extender near the wifi router.
- Wait till the LED on the extender blinks amber.
- Then, locate the WPS button on the router and press it using a pin.
- Simultaneously, press the WPS button on the extender within 2 minutes.
- Now, hold this button and wait till the LED near the WPS button on the extender blinks green.
- When this LED turns solid green, release this button.
- Next, connect your device to the extended network you just created by visiting WiFi Settings.
- Finally, your wireless range extender installation is completed.
Web GUI method for Linksys range extender installation
- Initially, turn on your Linksys range booster.
- Now, connect your computer or laptop to the range extender’s network.
- Hereon, open any web browser on your device and type the extender.linksys.com web address in the URL bar.
- Additionally, you can use the 192.168.1.1 IP address instead of the web address.
- After that, log into your device using the valid login credentials.
- Now, you reach the smart setup wizard of the extender.
- Hereon, change the SSID and password under the Wireless Settings to secure your network.
- Then, choose Range Extender or Access Point to extend your network.
- Select the Range Extender option and choose a network to extend by entering a reliable password.
- Furthermore, configure the 2.4 GHz or 5GHz settings under respective fields as per your device.
- Save these settings, tap Next, and connect the device to the network you have just created.
- Finally, you have learned how to install Linksys extender process.
Linksys repeater installation as an access point
- To begin with, prepare for the setup with a stable internet connection and an ethernet cable.
- Now, plug your range booster into the wall outlet.
- Then, connect your Linksys extender to the LAN port of the router using an ethernet cable.
- Further, connect your computer to the extender’s network.
- Hereon, open a web browser and type the extender.linksys.com web address in the browser bar.
- A login window prompts on the screen to enter the login credentials.
- After login, visit the Home Dashboard of your device.
- Hereon, choose the As a wired range extender (Access Point) option.
- Then, follow the further instructions to complete the extended network installation process.
- Ultimately, your how to install linksys range extender is completed.
Read More: how to reset linksys extender
Bottom Line
In a nutshell, you have gone through the complete process of how to install Linksys extender process. Hopefully, you have learned the different ways to accomplish this procedure easily. If you still want to know more, get in touch with us!